TEACHERS
                   TO LOG INTO AND USE THE SEOVEC SYSTEM
                BE SURE TO LOG OFF WHEN SESSION COMPLETED!

EXAMPLE SESSION

CONNECT>  vax4

USERNAME> _____________  --> enter your user name here

PASSWORD> _____________  --> enter your personal password
                              (it will not appear on the screen)

 You will see a series of messages and then you name prompt will appear-->

WL_NAME$              --> Here you will enter the function you wish to use
                              see below.

When you have completed your work and after exiting from the function you
are using, you will enter:

WL_NAME$ lo
(disconnect message)
CONNECT>

(NOTE: If you are logged on through a phone modem (at home?), you must
also hang up the phone connection.  To do this enter '+++' (without quotes)
at the CONNECT prompt and 'ATH' at the OK.)
---------------------end example session-----------------------------------

After logging on to the SEOVEC system there are several options, type one
of the following at your name prompt:

INET	 Takes you to a menu for choosing a desired function.

MAIL     Takes you to the old e-mail function.

PINE     Takes you to the new e-mail function (menu driven)

PHONE    Interactive communication with another user

WORD     Takes you to a word processing feature.  Great for preparing long
           e-mail messages.  See separate instructions for use.
           * use electronic mail in WORD and send mesage to self
           * then forward message when back mail prompt

TELNET   Need a computer's address for telnet function

NOTES    VAXnotes or DECnotes access

SET PASSWORD
         To reset password before required.  Passwords must be 10-32
           alphbetic characters with no spaces.

CLEAR    Clears screen

HUSH     Shuts off automatic alerts to terminal -- TALK will reactivate.

HELP     Brings up a list of topics and can get instructions on each.

EX       Takes you out of a particular function and back to your name
           prompt.

LO or BYE
         Log off the system -- DON'T FORGET THIS!!
         If logging off when access is through a modem, must also type
           "+++ATH" (no quotes) at the CONNECT> prompt to complete the
           process.  This is necessary even if get a message that says have
           been disconnected.

                            ACCESS FOR TEACHERS

At many schools there are terminals available in the library or computer
lab that can be used to log into SEOVEC as described above.  Please see
<> for further information.

There is often dial-up access available through a school district. 
Dial-up access will allow you to use the service at home or other location
through a modem.  This dial-up access is usually only available in the
evenings or on weekends.  To find out about dial-up access in your
district you should contact your superintendent or school contact person.

It is also possible to telnet to SEOVEC.  The telnet address would be
'seovec.ohio.gov' (no quotes).


                                 TEACHERS
                       TO LOG INTO THE SEORF SYSTEM
                    Two methods available to teachers.
               BE SURE TO LOG OFF WHEN SESSION IS COMPLETE!

Method 1:
         At the name prompt (NAME$) enter>  INET
         At the first menu choose 2 (Internet Resources)
         At the next menu choose 16 (SEORF)
         You can now log into SEORF with your user name or as a guest.

Method 2:
	Many schools have "pass through" accounts for SEORF.  By using a pas
through account you use a special login and password to SEOVEC that takes
you automatically to SEORF.  Please see your district's contact person or
Kathy Sampson (cc_ksampson)
for more details. 
   


After logging into SEORF you will be at the main screen and should choose
the area desired by pressing the up or down arrow to highlight the desired
item and then the right arrow to select.